| 序号 |
名称 |
作者 |
发表/刊物论文集 |
发表时间 |
| 1 |
On the Si content prediction for submerged arc welded metal via Calphad technique: a brief discussion |
张进 |
journal of materials research and technology |
2022-12-08 |
| 2 |
Effect of the additive graphene oxide on tribological properties of WC-Co cemented carbide |
张肖肖 |
International Journal of Refractory Metals and Hard Materials |
2022-12-01 |
| 3 |
地轮前置式中型免耕覆秸垄作玉米播种机转运平台研制 |
刘宏新 |
农业工程学报 |
2022-05-10 |
| 4 |
Constitutive behavior and microstructural evolution of 2060 Al-Li alloy under high strain rate experiment and simulation |
王星星 |
Materials Science and Engineering A |
2022-03-26 |
| 5 |
Length-based separation of Bacillus subtilis bacterial populations by viscoelastic micro fluidics |
刘萍 |
Microsystem & Nanoengineering |
2022-01-30 |
| 6 |
Investigation of Ti–45Nb alloy's mechanical and microscopic behaviors under transverse ultrasonic vibration-assisted compression |
王星星 |
Materials Science & Engineering A |
2022-01-20 |
| 7 |
Numerical Simulations of the Effect of the Asymmetrical Bending of the Hindwings of a Hovering C. buqueti Bamboo Weevil with Respect to the Aerodynamic Characteristics |
李新 |
Micromachines |
2022-11-17 |
| 8 |
A Review on Parallel Development of Flux Design and Thermodynamics Subject to Submerged Arc Welding |
张进 |
processes |
2022-11-05 |
| 9 |
Tribological behavior of WC-Al2O3-graphene composite at different temperatures |
张肖肖 |
International Journal of Smart and Nano Materials |
2022-11-04 |
| 10 |
Dynamic Event-Triggered Fault Detection for Discrete Networked Control System With Time-Delay |
王燕锋 |
IEEE ACCESS |
2022-10-12 |
| 11 |
Probing Element Transfer Behavior during the Submerged Arc Welding Process for CaF2-SiO2-Na2O-Cr2O3 Agglomerated Fluxes A Thermodynamic Approach |
张进 |
processes |
2022-09-20 |
| 12 |
On the Moving of Neutral Point for Mn Subject to Submerged Arc Welding under Various Heat Inputs Case Study into CaF2-SiO2-Na2O-MnO Agglomerated Fluxes |
张进 |
processes |
2022-09-17 |
| 13 |
Evaluation of Flux Basicity Concept Geared toward Estimation for Oxygen Content in Submerged Arc Welded Metal |
邵国友 |
metals |
2022-09-16 |
| 14 |
Element Transfer Behavior for CaF2-Na2O-SiO2 Agglomerated Flux Subject in Submerged Arc Welding Process |
张进 |
processes |
2022-09-14 |
| 15 |
Facilitating Flux Design Process Geared Towards Submerged Arc Welding via Thermodynamic Approach Case Study into CaF2-SiO2-Na2O-Al2O3-TiO2 Agglomerated Flux |
张进 |
Calphad |
2022-09-10 |
| 16 |
Determining the effects of LFHV-PEF treatment on the water distribution and vigor of aged rice seeds using LF-NMR |
Ensi Cheng |
International Journal of Agricultural and Biological Engineering |
2022-07-30 |
| 17 |
One-step Sintering of Porous TiAl3 Intermetallics using TiH2 as Raw Material in Thermal Explosion Reaction |
焦欣洋 |
Materials Letters |
2022-07-01 |
| 18 |
A Novel Hybrid Model for Short-Term Wind Speed Forecasting Based on Twice Decomposition, PSR, and IMVO-ELM |
夏鑫 |
COMPLEXITY |
2022-01-19 |
| 19 |
Determination of rice seed vigor by low-field nuclear magnetic resonance coupled with machine learning |
Ensi Cheng |
INMATEH Agricultural Engineering |
2022-09-30 |
| 20 |
Robust Fault-Tolerant Control of Continuous Lurie Networked Control Systems Based on the Observer with the Event-Triggered Mechanism |
王燕锋 |
Mathematical Problems in Engineering |
2022-09-28 |
| 21 |
Functional characteristics of the rigid elytra in a bamboo weevil beetle Cyrtotrachelus buqueti |
李新 |
IET Nanobiotechnology |
2022-08-13 |
| 22 |
Metasurfaces design for tuning of fexural wave and SH wave |
杨哲 |
Applied Physics A |
2022-07-19 |
| 23 |
H∞ control for a networked Markovian jump system subject to data packet loss based on the observer |
王燕锋 |
IET Cyber-systems and Robotics |
2022-03-09 |
| 24 |
罗茨转子具有节弦高内共轭段的高能轮廓构造 |
刘萍 |
流体机械 |
2022-02-02 |
| 25 |
基于自适应扰动观察法的光伏灌溉系统设计与验证 |
施允洋 |
灌溉排水学报 |
2022-09-15 |
| 26 |
基于模态分析的定子各向异性材料参数矫正方法 |
唐友亮 |
机械强度 |
2022-03-31 |
| 27 |
基于DSP低压铸造铝合金轮毂智能温度控制系统设计 |
赵岩 |
机床与液压 |
2022-12-25 |
| 28 |
基于罗茨泵平均理论流量的转子容积利用系数反求法 |
肖荣和 |
机械传动 |
2022-06-30 |
| 29 |
GH4037合金毫秒激光倾斜打孔试验与仿真 |
林卿 |
航空发动机 |
2022-06-01 |
| 30 |
轻质铝合金的变质研究 |
潘海成 |
热加工工艺 |
2022-04-15 |
| 31 |
果园仿形风送喷雾机构设计与试验 |
房开拓 |
中国农机化学报 |
2022-03-01 |
| 32 |
以党史为载体推进新时代大学生爱国主义教育研究 |
姜海东 |
湖北开放职业学院学报 |
2022-12-22 |
| 33 |
“新工科”背景下双创教育在机械类专业人才培养中的应用研究 |
杨扬 |
南方农机 |
2022-11-18 |
| 34 |
高校贫困大学生心理弹性的应用价值及影响因素分析 |
王洁 |
才智 |
2022-11-17 |
| 35 |
新时代青年红色文化认同现状及培育路径研究 |
姜海东 |
文化创新比较研究 |
2022-11-15 |
| 36 |
基于逆向工程人体股骨建模及有限元分析 |
赵海芳 |
南方农机 |
2022-11-03 |
| 37 |
基于改进EGM(1,1)的刀具磨损预测 |
李光宇 |
内燃机与配件 |
2022-11-01 |
| 38 |
新时代大学生红色文化认同现状与培育路径探索 |
姜海东 |
成才之路 |
2022-10-15 |
| 39 |
基于有限元的节流截止放空阀结构分析 |
徐青青 |
南方农机 |
2022-09-07 |
| 40 |
积极心理学视角下高校贫困大学生心理弹性干预系统的构建 |
王洁 |
才智 |
2022-09-01 |
| 41 |
普通铣床工作台纵向进给间隙消除机构的设计 |
邱绍虎 |
金属加工（冷加工） |
2022-08-01 |
| 42 |
数控机床进给系统三电平直线电机模型预测转矩控制 |
唐友亮 |
大电机技术 |
2022-07-15 |
| 43 |
模糊PID神经网络逆控制多电机系统研究 |
唐友亮 |
机电信息 |
2022-07-10 |
| 44 |
基于翻转课堂的单片机实验教学优化改革 |
宋安然 |
中国多媒体与网络教学学报(上旬刊) |
2022-03-31 |
| 45 |
后疫情时代高校专业课教学改革研究——以“冲压工艺与模具设计”课程为例 |
翟崇琳 |
南方农机 |
2022-01-02 |
| 46 |
创新创业教育融入人才培养体系的思路 |
刘祎 |
南方农机 |
2022-01-01 |
| 47 |
Investigation of Ti–45Nb alloy's mechanical and microscopic behaviors under transverse ultrasonic vibration-assisted compression |
王星星 |
Materials Science & Engineering A |
2022-01-20 |
| 48 |
A Novel Hybrid Model for Short-Term Wind Speed Forecasting Based on Twice Decomposition, PSR, and IMVO-ELM |
夏鑫 |
COMPLEXITY |
2022-01-19 |
| 49 |
半开式离心叶轮的参数化建模方法 |
华奇 |
内江科技 |
2022-01-15 |
| 50 |
后疫情时代高校专业课教学改革研究——以“冲压工艺与模具设计”课程为例 |
翟崇琳 |
南方农机 |
2022-01-02 |
| 51 |
创新创业教育融入人才培养体系的思路 |
刘祎 |
南方农机 |
2022-01-01 |
